Thesis fluid dynamics

Perform scientific and technical analysis of specific topics. The flow field resulting from the two similar converging-plane jet nozzles was investigated using a computational fluid dynamics approach. For a very high quantity of fibers to be produced, many small-scale jets placed side by side are needed, these jets draw the air from the same compressed air storage tank, so the fiber formation is critically dependent on the aerodynamics of the impingement jet flow field. General competence: Discussing and solving scientific and technical problems as well as formal reporting on achieved results within analyses, design and operation of fluids engineering components and systems. The case in which there are flow fluctuation reduction devices installed and the case without the devices installed were studied. Therefore Computational Fluid Dynamics CFD based simulation model can be used as an analysis tool for evaluating scour and failure risk of existing bridges and in the design of new bridges. Montgomery Knight Building High-speed air jets are often used in industry for manufacturing thin fibers through a process known as melt-blowing MB. The student will give an oral presentation approximately 4 weeeks before the finishing date. An alternate way to evaluate and understand the process of scour is to perform simulations under experimental conditions.

For a very high quantity of fibers to be produced, many small-scale jets placed side by side are needed, these jets draw the air from the same compressed air storage tank, so the fiber formation is critically dependent on the aerodynamics of the impingement jet flow field.

This will be arranged by the fluid mechanics Research Group. Therefore Computational Fluid Dynamics CFD based simulation model can be used as an analysis tool for evaluating scour and failure risk of existing bridges and in the design of new bridges.

It is not possible to improve an awarded grade by submitting a new thesis.

The MB process in this study was modeled as a pair of two jets placed at an angle of approximately 60 degrees to each other, and when there are many such jet pairs, a stream so that multiple streams of fibers may be simultaneously produced. General competence: Discussing and solving scientific and technical problems as well as formal reporting on achieved results within analyses, design and operation of fluids engineering components and systems. However, the real-word MB devices always have complicate internal structures such as mixing chambers and air channels between air tank and die tip, which may cause instability and cross flow in the jet flow filed and had a significant impact on the formation of fibers and nonwoven webs with small scale jets. A Learning outcome After completion of this subject the student will have detailed knowledge of one or more of the following: general fluid mechanics, aerodynamics, hydraulic machines, wind turbines, CFD, Experimental fluid dynamics, gas transport in pipelines, multiphase flows. A single-phase quasi-steady approach was used to obtain the bed shear stresses and the moving boundary formulation was based on an empirical correlation for critical shear stress to iteratively deform the bed toward equilibrium scour conditions. The case in which there are flow fluctuation reduction devices installed and the case without the devices installed were studied. This study extends the previous 2-D iterative scouring procedure with an objective to develop an automated iterative methodology for simulating a 3-D computational domain with inundated bridge deck to predict the final shape and size of scour-hole. The student will give an oral presentation approximately 4 weeeks before the finishing date. This study consists of three parts: a a baseline case without any flow fluctuation reduction devices as studied to understand the mechanism of the instability and to investigate the details of the internal flow filed; b a wired mesh screen was placed between the air plates and the die tip, to study the effect on both the velocity and pressure distribution across the screen; c a honeycomb installed near the exit of last mixing chamber trying to reduce the velocity across the flow direction and turbulent intensity. However, it requires a considerably long time and is very costly. In June, , Bhaskar Rao Tulimilli successfully defended his thesis and has been awarded a Master of Science degree. Abstract Design and construction of bridges need re-evaluation as it has raised considerable safety concerns in recent times. To understand and evaluate the scouring process, physical modeling is the best approach and therefore experiments are generally conducted by reducing the scale of setup. It is not possible to improve an awarded grade by submitting a new thesis.

This study consists of three parts: a a baseline case without any flow fluctuation reduction devices as studied to understand the mechanism of the instability and to investigate the details of the internal flow filed; b a wired mesh screen was placed between the air plates and the die tip, to study the effect on both the velocity and pressure distribution across the screen; c a honeycomb installed near the exit of last mixing chamber trying to reduce the velocity across the flow direction and turbulent intensity.

However, it requires a considerably long time and is very costly. The student will give an oral presentation approximately 4 weeeks before the finishing date.

Thesis fluid dynamics

An alternate way to evaluate and understand the process of scour is to perform simulations under experimental conditions. Skill to conduct large project, establish project plans and write project reports according to current standards.

General competence: Discussing and solving scientific and technical problems as well as formal reporting on achieved results within analyses, design and operation of fluids engineering components and systems. However, the real-word MB devices always have complicate internal structures such as mixing chambers and air channels between air tank and die tip, which may cause instability and cross flow in the jet flow filed and had a significant impact on the formation of fibers and nonwoven webs with small scale jets.

fluid mechanics research topics
Rated 5/10 based on 17 review
Download
PhD Theses with the Fluid Mechanics and Thermodynamics Research Group